MacroPower 1100 / 8800
1100t injection molding machine
Add to favorites
Add to favorites
|Category||1000t or more Injection moulding machines|
- 2 + 2 Core Pullers (fixen and moving platen)
- 16 Hydraulic "Cascade" sequential injection points.
- Suhling SMB 1221 S3 CNC Robot with Euromap 12 interface
- 56 mould heating zones.
- 9 chamber temperatures zones
- 4 control circuits for mould temperature control (two in fixed plate and 2 in movable plate)
- Euromap 12 robot interface with Suhling SMB 1221 S3 CNC robot.
- Mould changing table with mould clamping with hydraulic flanges.
- Complete pressure cushion cylinders, opening and closing cylinder seals and tear-off cylinders were changed in 2013.
- P1 pump was replaced in 2016.
- Independent proportional valves for closing, injection, core pullers, sequential and clamping system of the fixed platen and cores pullers, ejector and clamping system of the moving platen.
- CE Marking
- Automatic opening doors, on the operator side and opposite operator side, driven by hydraulic motors.
- Automatic clamping system
- Automatic mold change system: the mold is introduced into the machine from the side and the flanges are on the top and bottom of the platens.
|Screw diameter||150 mm|
|Clamping force||27.000 kN|
|Daylight between platens max||3.900 mm|
|Dimensions (long x wide x high)||15.440 x 4.680 x 3.600 mm|
|Distance between tie-bars (h x v)||2.100 x 1.700 mm|
|Ejector force||772 / 380 kN|
|Injection pressure||1.707 bar|
|Injection rate||1.834 cm³/s|
|Injection volume||11.133 cm³|
|Mold opening force||1.767 kN|
|Mould height max||1.900 mm|
|Mould height min||1.100 mm|
|Mould opening stroke max||2.800 mm|
|Oil tank capacity||4.100 l|
|Platen size (h x v)||3.020 x 2.600 mm|
|Power: installed max||250 kW|
|Screw L/D ratio||20|
|Screw speed||83 rpm|
|Shot weight max||10.131 g|