NISSEI ASB

Working hours: 33.882 h.
Working in a clean room. Excellent maintenance
Daylight: 470 mm (injection station) - 415 mm. (Blow station)

Standard number of cavity:
-Injection: 1,2,3,4,5 (6)
-Blow: 1,2,3,4,5 (6)

Injection unit:
-Injection unit model: IU-10
-Screw diameter: 38 44 mm.
-Injection capacity: 113 152 cm3/shot
-Injection pressure: 128 95 Mpa
-Injection rate: 114 154 cm3/s
-Screw stroke: 100 mm.
-Screw speed: 10 - 160 r/min

Injection mold clamp station:
Upper mold clamping force: 60 kN
Lower mold clamping force: 60 kN
Upper mold clamping stroke: 250 mm.
Lower mold clamping stroke: 200 mm.

Conditioning station
Conditioning core stroke: 270 mm.
Conditioning pot stroke: 170 mm.
(up/down movement adjustement by timer)

Stretch blow mold clamp station
Blow mold clamping force: 78 kN
Blow mold clamping stroke: 140 (75+65) mm.
Stretch force: 1.91 kN
Stretch stroke: 200mm
Blow core clampling force: 7.60 kN
Blow core stroke: 250 mm.

Eject station:
Eject stroke: 125 mm.

Dimensions aprox.: Length = 3750 mm., Width = 1130 mm., Height = 2730 mm. (Volume aprox. = 11.57 m3).